Honeywell RTH8560D Manual pdf Honeywell Thermostat RTH8560D Manual Installation Reset Programming User Manual PDF

January 12, 2025 by admin

Honeywell RTH8560D Manual

Table of Contents

Honeywell Thermostat RTH8560D Manual

Fullscreen

Honeywell RTH8560D Installation Manual

Honeywell RTH8560D Reset

Replace Air Filter

Replace air filter (1). Reset the timer by touching the “dismiss” button on
thermostat screen after it is replaced.

Honeywell RTH8560D Programming

Scheduling Options

0 = Non-Programmable
1 = 1-Week Programmable
2 = 5-2 Programmable
3 = 5-1-1 Programmable
4 = 7-Day Programmable
Note: You can change default MO-FR, SA-SU schedule here. To edit periods during days,
temperature setpoints, or to turn Schedule On/Off, touch MENU and go to SCHEDULE.

Program Schedule
To adjust program schedules
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-set settings (shown in the table below),
since they can reduce your heating/cooling expenses.
Wake – Set to the time you wake up and the
temperature you want during the morning, until you
leave for the day.
Away – Set to the time you leave home and the
temperature you want while you are away (usually an
energy-saving level).
Home – Set to the time you return home and the
temperature you want during the evening, until
bedtime.
Sleep – Set to the time you go to bed and the
temperature you want overnight (usually an energysaving
level).
NOTE: To temporarily or permanently override any of the above program
schedules, see page 13.
1 Touch Menu on the thermostat home
screen.
2 Touch the or arrows until you
see SCHEDULE, then touch Select.
3 Touch the or arrows to select a
period in a day or set of days, then
touch Select on the period you want
to edit. (You can only edit a period of
days according to the schedule type
selected. To change schedule type,
see setup # 120 on page 9.)
4 Touch the time area, then touch or
to adjust when the period starts.
Touch Select to confirm.
5 Touch the temperature area,
then touch or to adjust your
preferred temperature for the
mode that’s currently active (either
heating or cooling). Touch Select
to confirm. Then touch or to
adjust your preferred temperature
for the inactive mode. Touch Select to
confirm.
Heat Cool
Wake
(6:00 am) 70 ° 78 °
Away
(8:00 am) 62 ° 85 °
Home
(6:00 pm) 70 ° 78 °
Sleep
(10:00 pm) 62 ° 82 °
The above table is only an example.
Back Select
M39447 M39448
Back Select
Sched.
On/Off
AM
Heat To
Back Select
M36602
M36352
AM
HeatTo
Back Select
13
RTH8500 Series
M36355
Back Select
Sched.
On/Off
M36347
Back Select
M36349
Back Select
Sched.
On/Off
M36353
AM
HeatTo
Done Cancel Period
6 Edit the next period or use the
until you see Done, then press Select
to save changes and go to the home
screen.
NOTE: To temporarily cancel a schedule
period (such as Saturday-Sunday Away,
for example, because you’ll be home), go
to the SCHEDULE option and touch the
or arrows to select a period. Touch
Select on the period you want to cancel,
then touch Cancel Period. To reactive the
period you cancelled, touch Cancel Period
again to select period start time and
preferred temperature.

Schedule overrides
Hold Until (temporary hold): Overrides the current temperature setpoint for a
maximum of 12 hours. You might use this feature to hold a temperature until a
specific time.
Permanent hold: Overrides the current temperature set point permanently until
you manually change it or reactivate a schedule.
Program schedule override (temporary)
1 Touch or on the thermostat
home screen to set your desired
temperature. Hold Until will appear
together with the time the hold will
end.
2 To change when the hold will end,
touch the time and wait until the time
starts blinking. Then, touch or
to set when you want the hold to end.
Touch Hold Until once more to confirm
changes and return to the home
screen.
NOTE: After the hold period ends, the
thermostat will automatically return to
the program schedule. If you want to
cancel the hold, touch Hold Until and then
touch Run Schedule.

Quick Installation Guide
Wiring—conventional systems
Alternate wiring (conventional systems)
If labels do not match terminals, connect wires as shown below (see notes, below).
NOTES:

If you must connect both R and Rc wires, set the R Slider Tab to the down
position (2 wires).
If your old thermostat had both R and RH wires, set the R Slider Tab to the
down position (2 wires). Then connect the R wire to the Rc terminal, and the
RH wire to the R terminal.
If your old thermostat had only 1 C or C1 wire, connect it to the C terminal. If
your old thermostat had 2 C or C1 wires, wrap each separately with electrical
tape and do not connect them.

Smart Response® Technology
This feature allows the thermostat to “learn” how long the furnace and air
conditioner take to reach programmed temperature settings, so the temperature
is reached at the time you set. For example: Set the Wake time to 6 am, and the
temperature to 70°. The heat will come on before 6 am, so the temperature is 70°
by the time you wake at 6. The message “Recovery” is displayed when the system
is activated before a scheduled time period.

Honeywell Home RTH8560D Installation Manual